☰ منو
مرجع عمومی J1587

جستجوی کد خطای ولوو و رنو تراکس

عمومی و بدون نیاز به ورود یا ثبت‌نام

فهرست تمام MIDها

MID 122
MID 122
13 کد خطا
MID 128
واحد کنترل موتور
1,249 کد خطا
MID 130
واحد کنترل گیربکس (TCM)
491 کد خطا
MID 135
MID 135
1 کد خطا
MID 136
واحد کنترل ترمز ABS/EBS
596 کد خطا
MID 139
MID 139
1 کد خطا
MID 140
صفحه کیلومتر و کلاستر
186 کد خطا
MID 141
سامانه Dynafleet
31 کد خطا
MID 142
MID 142
33 کد خطا
MID 144
واحد کنترل خودرو
181 کد خطا
MID 146
کنترل تهویه کابین
45 کد خطا
MID 150
کنترل تعلیق بادی ECS
176 کد خطا
MID 163
واحد ایموبلایزر
11 کد خطا
MID 165
MID 165
13 کد خطا
MID 166
پایش فشار تایر
155 کد خطا
MID 175
MID 175
68 کد خطا
MID 176
MID 176
339 کد خطا
MID 178
MID 178
24 کد خطا
MID 179
درگاه FMS
12 کد خطا
MID 184
کنترل محور عقب الکتروهیدرولیک
49 کد خطا
MID 185
خشک‌کن هوای APM
96 کد خطا
MID 187
MID 187
27 کد خطا
MID 203
MID 203
16 کد خطا
MID 204
MID 204
7 کد خطا
MID 206
رادیو
67 کد خطا
MID 214
دزدگیر امنیتی
14 کد خطا
MID 216
کنترل روشنایی
220 کد خطا
MID 219
کروز کنترل تطبیقی
36 کد خطا
MID 220
تاخوگراف
45 کد خطا
MID 222
کنترل ریتاردر
54 کد خطا
MID 223
واحد کنترل انتخاب‌گر دنده (GSCM)
102 کد خطا
MID 230
MID 230
65 کد خطا
MID 231
تلفن همراه یکپارچه
17 کد خطا
MID 232
ایربگ و کمربند ایمنی
30 کد خطا
MID 233
MID 233
2 کد خطا
MID 238
MID 238
41 کد خطا
MID 241
MID 241
43 کد خطا
MID 248
MID 248
16 کد خطا
MID 249
تجهیزات جانبی AEM/BBM
87 کد خطا
MID 250
کنترل فرمان
17 کد خطا

نتایج

4,676 کد پیدا شد
MID 216 · PSID 58 · FMI 5

کنترل روشنایی

مرجع عمومی

قطعه یا پارامتر: Light off indication in the central light switch.

جریان مدار پایین است یا مدار باز است.

متن فنی اصلی برای تطبیق دقیق

The current at the LCM output to the LED is below 500 mA. There is a break in the wiring between the LCM and the light switch, or there is a break in the wiring between the light switch and the ground point.

MID 216 · PSID 58 · FMI 6

کنترل روشنایی

تأییدشده در Tech Tool

قطعه یا پارامتر: Light off indication in the central light switch.

جریان مدار بالاست یا اتصال‌کوتاه به زمین وجود دارد.

متن فنی اصلی برای تطبیق دقیق

The current at the output of the LCM unit to the LED is higher than 5.8 A. The wiring between the LCM unit and the light switch is shorted to ground.

MID 216 · PSID 59 · FMI 5

کنترل روشنایی

تأییدشده در Tech Tool

قطعه یا پارامتر: Light switch, anti-fog light.

جریان مدار پایین است یا مدار باز است.

متن فنی اصلی برای تطبیق دقیق

The current at the LCM output to the fog light switch is below 500 mA. There is an open in the wiring between the LCM and the light switch, or an open in the wiring between the light switch and the ground point.

MID 216 · PSID 59 · FMI 6

کنترل روشنایی

تأییدشده در Tech Tool

قطعه یا پارامتر: Light switch, anti-fog light.

جریان مدار بالاست یا اتصال‌کوتاه به زمین وجود دارد.

متن فنی اصلی برای تطبیق دقیق

The current at the output of the LCM unit to the fog light switch is higher than 5.8 A. The wiring between the LCM unit and the light switch is shorted to ground.

MID 216 · PSID 60 · FMI 5

کنترل روشنایی

تأییدشده در Tech Tool

قطعه یا پارامتر: Light switch, rear anti-fog light.

جریان مدار پایین است یا مدار باز است.

متن فنی اصلی برای تطبیق دقیق

The current at the output of the LCM to the rear fog light switch is below 0.1 A. Open circuit in the wiring between the LCM and the light switch or open circuit in the wiring between the light switch and the ground point.

MID 216 · PSID 60 · FMI 6

کنترل روشنایی

تأییدشده در Tech Tool

قطعه یا پارامتر: Light switch, rear anti-fog light.

جریان مدار بالاست یا اتصال‌کوتاه به زمین وجود دارد.

متن فنی اصلی برای تطبیق دقیق

The current at the output of the LCM unit to the rear fog light switch is higher than 3.8 A. Short circuit in the wiring between the LCM unit and the light switch to ground.

MID 216 · PSID 61 · FMI 3

کنترل روشنایی

تأییدشده در Tech Tool

قطعه یا پارامتر: Additional lighting.

ولتاژ مدار بالاست یا اتصال‌کوتاه به ولتاژ بالاتر وجود دارد.

متن فنی اصلی برای تطبیق دقیق

The voltage at the LCM output is equal to or greater than the LCM supply voltage. The wiring between the LCM, light switch, or headlights is shorted to the supply wire.

MID 216 · PSID 61 · FMI 4

کنترل روشنایی

تأییدشده در Tech Tool

قطعه یا پارامتر: Additional lighting.

ولتاژ مدار پایین است یا اتصال‌کوتاه به زمین وجود دارد.

متن فنی اصلی برای تطبیق دقیق

The voltage at the output of the LCM unit is less than 2 V. The wires between the LCM unit, lights or light switch are shorted to ground.

MID 216 · PSID 62 · FMI 12

کنترل روشنایی

تأییدشده در Tech Tool

قطعه یا پارامتر: Switching to low mode.

خرابی واحد یا قطعهٔ هوشمند.

متن فنی اصلی برای تطبیق دقیق

The light switch has been pressed for more than 60 seconds. The switch is damaged or the wiring between the LCM and the switch is shorted to ground.

MID 216 · PSID 63 · FMI 12

کنترل روشنایی

تأییدشده در Tech Tool

قطعه یا پارامتر: Switching to the lighting off mode.

خرابی واحد یا قطعهٔ هوشمند.

متن فنی اصلی برای تطبیق دقیق

The light switch has been pulled out for more than 60 seconds. The switch is damaged or the wiring between the LCM and the switch is shorted to ground.

MID 216 · PSID 64 · FMI 5

کنترل روشنایی

تأییدشده در Tech Tool

قطعه یا پارامتر: Interior lighting.

جریان مدار پایین است یا مدار باز است.

متن فنی اصلی برای تطبیق دقیق

The current at the LCM output to the interior lights is below 500 mA. The lights are burned out, there is a break in the wiring between the LCM and the switch, or there is a break in the wiring between the switch and the ground point.

MID 216 · PSID 64 · FMI 6

کنترل روشنایی

تأییدشده در Tech Tool

قطعه یا پارامتر: Interior lighting.

جریان مدار بالاست یا اتصال‌کوتاه به زمین وجود دارد.

متن فنی اصلی برای تطبیق دقیق

The current at the output of the LCM unit to the interior lighting lamps is higher than 5.8 A. Short circuit between the LCM unit and the switch to ground.

MID 216 · PSID 65 · FMI 12

کنترل روشنایی

تأییدشده در Tech Tool

قطعه یا پارامتر: Trailer detection, signal.

خرابی واحد یا قطعهٔ هوشمند.

متن فنی اصلی برای تطبیق دقیق

The trailer detection sensor is faulty, there is an open or short circuit in the wiring harness.

MID 216 · PSID 66 · FMI 3

کنترل روشنایی

تأییدشده در Tech Tool

قطعه یا پارامتر: Trailer detection, power.

ولتاژ مدار بالاست یا اتصال‌کوتاه به ولتاژ بالاتر وجود دارد.

متن فنی اصلی برای تطبیق دقیق

The voltage at the output of the LCM unit is equal to or greater than the supply voltage of the LCM unit, the wiring between the LCM unit and the component is shorted to the power wire, or the sensor is faulty.

MID 216 · PSID 66 · FMI 4

کنترل روشنایی

تأییدشده در Tech Tool

قطعه یا پارامتر: Trailer detection, power.

ولتاژ مدار پایین است یا اتصال‌کوتاه به زمین وجود دارد.

متن فنی اصلی برای تطبیق دقیق

The voltage at the output of the LCM unit is less than 2 V. The wires between the LCM unit and the sensor are shorted to ground.

MID 216 · PSID 200 · FMI 9

کنترل روشنایی

تأییدشده در Tech Tool

قطعه یا پارامتر: Communication failure via SAE J1939 data channel with engine control unit (MID128).

نرخ به‌روزرسانی داده غیرعادی است.

متن فنی اصلی برای تطبیق دقیق

The LCM (MID216) is not receiving signals from the engine control unit (MID128) via the SAE J1939 data link. The data link wires between the units are broken or partially damaged. The engine control unit may be faulty.

MID 216 · PSID 201 · FMI 9

کنترل روشنایی

تأییدشده در Tech Tool

قطعه یا پارامتر: Communication failure via SAE J1939 data channel with vehicle control unit (MID144).

نرخ به‌روزرسانی داده غیرعادی است.

متن فنی اصلی برای تطبیق دقیق

The LCM (MID216) is not receiving signals from the vehicle control unit (MID144) via the SAE J1939 data link. The data link wires between the units are broken or partially damaged. The vehicle control unit may be faulty.

MID 216 · PSID 202 · FMI 9

کنترل روشنایی

تأییدشده در Tech Tool

قطعه یا پارامتر: Communication failure via SAE J1939 data channel with instrument cluster control unit (MID140).

نرخ به‌روزرسانی داده غیرعادی است.

متن فنی اصلی برای تطبیق دقیق

The LCM (MID216) does not receive signals from the instrument cluster control unit (MID140) via the SAE J1939 data link. The data link wires between the units are broken or partially damaged.

MID 216 · PSID 206 · FMI 9

کنترل روشنایی

تأییدشده در Tech Tool

قطعه یا پارامتر: Communication failure on the SAE J1939 data channel with the retarder control unit (MID222).

نرخ به‌روزرسانی داده غیرعادی است.

متن فنی اصلی برای تطبیق دقیق

The LCM (MID216) does not receive signals from the retarder control unit (MID222) via the SAE J1939 data link. The data link wires between the units are broken or partially damaged.

MID 216 · PSID 207 · FMI 12

کنترل روشنایی

تأییدشده در Tech Tool

قطعه یا پارامتر: Communication failure via SAE J1587 data channel with gear selector control unit (MID223).

خرابی واحد یا قطعهٔ هوشمند.

متن فنی اصلی برای تطبیق دقیق

The LCM (MID216) does not receive signals from the gear selector control unit (MID223) via the SAE J1587 data link. The data link wires between the units are broken or partially damaged.

MID 216 · PSID 214 · FMI 9

کنترل روشنایی

تأییدشده در Tech Tool

قطعه یا پارامتر: Communication failure via SAE J1939 data link with the accessory control unit (MID249)

نرخ به‌روزرسانی داده غیرعادی است.

متن فنی اصلی برای تطبیق دقیق

The LCM (MID216) does not receive signals from the accessory control unit (MID249) via the SAE J1939 data link. The data link wires between the units are broken or partially damaged.

MID 219 · SID 1 · FMI 13

کروز کنترل تطبیقی

تأییدشده در Tech Tool

قطعه یا پارامتر: ACC system radar.

کالیبراسیون نادرست است.

متن فنی اصلی برای تطبیق دقیق

The radar is not aimed correctly. The radar is installed offset or the radar mount is damaged.

MID 219 · SID 2 · FMI 3

کروز کنترل تطبیقی

تأییدشده در Tech Tool

قطعه یا پارامتر: ACC system radar.

ولتاژ مدار بالاست یا اتصال‌کوتاه به ولتاژ بالاتر وجود دارد.

متن فنی اصلی برای تطبیق دقیق

The ACC control unit receives a message that the voltage supplied to the radar is higher than 12 V. The radar power supply wire is shorted to a circuit with a higher voltage or the A75 stability sensor is faulty.

MID 219 · SID 2 · FMI 4

کروز کنترل تطبیقی

تأییدشده در Tech Tool

قطعه یا پارامتر: ACC system radar.

ولتاژ مدار پایین است یا اتصال‌کوتاه به زمین وجود دارد.

متن فنی اصلی برای تطبیق دقیق

The ACC control unit receives a message that the voltage supplied to the radar is below 12 V. There is a break in the power supply wire, a short circuit in the power supply wire to ground, or the A75 stability sensor is faulty.

MID 219 · SID 2 · FMI 12

کروز کنترل تطبیقی

تأییدشده در Tech Tool

قطعه یا پارامتر: ACC system radar.

خرابی واحد یا قطعهٔ هوشمند.

متن فنی اصلی برای تطبیق دقیق

The ACC control unit receives a message that one of the radar components is faulty. Internal radar fault.

ترجمه تأییدشده به فارسی نمایش داده می‌شود. در موارد در حال بررسی، شرح دقیق FMI و متن اصلی برای جلوگیری از ترجمه نادرست ارائه می‌شود.